Antiquing Colour Midnight Gray

ANTIQUE RELEASE COLOURING is used as a bond breaker in the stamping process. It is a dust-on powder with water repellent properties that helps prevent wet concrete

from adhering to the polyurethane texture mat. Anitque release colouring is also used as a colouring agent, leaving a portion of the colour, usually darker than the

concrete colour, embedded in the low points of the newly textured concrete. This product should be broadcast in thin, even coats that overlap just enough to produce

a uniform layer on the slab surface. Release powder can be thrown by hand or with a 6” mason’s brush. Stamping can begin as soon as the release agent is applied.

Removal is accomplished by brushing then rinsing with a garden hose spray nozzle, light pressure wash, scrubbing, or buffing. Remove only enough to achieve desired antique effect.